Yes, the VanRug part # VRDP14M that you referenced does fit your 2017 Ram ProMaster 1500 with the 118 inch wheelbase. There would be no cutting required. view full answer...
It sounds like you might be looking for a cost effective ladder rack for a 2019 Ram 1500. If that is the case then the most cost effective option we have which does not require drilling is the Erickson Truck Bed Ladder Rack part # EM07706. The Erickson Truck Bed Ladder Rack is an excellent option which provides you with an 800 lb weight capacity and has built-in load stops. view full answer...
Draw-Tite manufactures their receiver hitches in Mexico. If you'd prefer something manufactured in the USA, Curt offers a similar hitch as part # C13295.
If you need a trailer wiring harness but you already have the factory tow package, you'd use # HM40975 or # 22112 if your ProMaster doesn't have the tow package. For a ball mount, use # C45030 and for a 1-7/8 inch ball use # 19260 or # 63845 for a 2 inch ball. Then you will need a pin and clip like # PC3.
I've linked you to some installation... view full answer...
On step 3 section A you can see where the sandpaper adhesive and primer is used. Basically it's along the edge of the bracket where the exclamation point logo is. view full answer...
If a step was needed along one of the side doors on your 2017 Ram ProMaster 1500 you could install Carr Step for Cargo Vans - Grated Steel Platform - Galvanized - 24" Long - 500 lbs Item # CARR501090 which is a manually operated retractable step. You might be able to make it work at the back but I can't guarantee it. There aren't any electric options that will work.
Another option, if the van has a 2 inch trailer hitch, is a step such as # CARR190011 or # HE3045. If it doesn't have a hitch... view full answer...
Looking at your picture you will not need an exhaust tip extension. Actually, if you used one it would fit around the existing tip making the pipe closer to the hitch. The fact that the exhaust exits down and not at the hitch and the pipe does not make contact with the hitch is perfectly fine.
It looks a lot like hitch # C13295 that we have installed on a similar vehicle as your 2015 Ram ProMaster 1500. I have linked a video showing the installation. The exhaust was in the exact same location... view full answer...
We have everything you need to set your Ram ProMaster 1500 up for towing!
Starting with the trailer hitch I highly recommend the Draw-Tite Max-Frame # 76050, which in addition to being economically priced, features a sleek hidden cross-tube design for an unassuming OEM appearance on the van and more than enough capacity to safely pull your trailer.
I have attached an installation video that you can use for reference.
Moving on to wiring you will need to start with a 4-Way connector.... view full answer...
Hey there Chris; the only ladder rack for your 2018 Ram ProMaster 1500 is from Thule:
- Thule TracRac TracVan ES Van Ladder Rack # TH29613XT
It doesn't have any type of side pull-down option, but does have a nice 500 lb capacity and comes with load stops that help secure your cargo. view full answer...
Since you have a ProMaster we have a great solution for an awning with the Thule Hideaway Awning part # TH620001 which was specifically designed for your high roof van. The only other thing needed to install it is the adapter part # TH301668. This is a square awning setup like you are looking for as well. view full answer...
The Dodge ProMaster Van Adapter for Thule HideAway Awning TH620001 # TH301649 that you referenced comes with all of the parts needed to mount the Hideaway part # TH620001 to your Dodge Promaster 2500. You would not need to buy multiples of this kit to make it work. You only need a single kit. view full answer...
To replace a 4-Way/7-Way connector on your 2021 Ram ProMaster 1500 you need the Hopkins Socket Kit # HM40975.
Otherwise, if you're needing to ADD 4-Way and 7-Way sockets then you need the following parts:
- Curt T-Connector Vehicle Wiring Harness # C58DR
- Universal Installation Kit # ETBC7
- No-Drill Mount Bracket, Long # 18136
- Extra 10 Gauge Wire # 10-1-1 (on an as-needed basis)
If you also need a brake controller then I really like the Redarc Tow-Pro Liberty Brake Controller... view full answer...
Yes. You could mount the MaxxFan Dome Plus Roof Vent w/ 12V Fan - LED Light - 6" Diameter - Manual Lift - Black # MA00-03810B on a wall safely, but I would only recommend that you make sure you position the rain guard downwards so as not to allow any water to get in during storms. This fan is designed to be mounted in roofs or walls that are at least 1" thick and up to 6" thick, so as long as you've got a wall that thick this will work. view full answer...
We have confirmed that the WeatherTech front floor mats part # WT446481 that you referenced are a fit for your 2020 Ram ProMaster 1500. These will fit and work really well! view full answer...
Yes, we do offer replacement hardware for hitches like the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" item # 75882. You will want to go to the Replacement Hardware Kit for Trailer Hitches item # RHK. You will enter Draw-Tite and then 75882 to get the hardware required to install that hitch. view full answer...
We have not tested the Thule T2 Pro # TH83JV on a 2015 Ram ProMaster 1500 for rear door clearance. You will most likely need a hitch extender to have proper clearance, though.
A good option for a hitch extender is tetrailer # e88YR which will extend that hitch pin hole measurement out an extra 8 inches. This extender does have a Tongue Weight rating of 300 lbs, but it also reduces the TW rating of your hitch receiver by 50%. You will be limited by the lowest rated component so you will... view full answer...
If you are wanting to add a hitch extender to your 2019 Ram ProMaster 1500, you will decrease the hitch tongue weight and tow weight capacities by 50%. With that being said, if you use a hitch extender like the Hitch Extender For 2" Trailer Hitch Receiver 7" # HE06 (the shortest one we offer for 2-inch hitches), your weight will decrease to 150 pounds.
Depending on what cargo box you are wanting to transport on your vehicle as well as the weight of the cargo itself, you may have to buy... view full answer...
No, you do not need a hitch extender to use the Yakima EXO Swing Away Enclosed Cargo Carrier item # Y62VR with your 2019 ProMaster. The distance from the center of the hitch pin hole to the closest part of the rack is 4-1/4".
If you do need some extra space between your rear doors and the cargo carrier the only approved hitch extender is the Yakima StraightShot item # Y69VR. This extender is 7-1/4" long.
I have linked a review video below. view full answer...
Yes, the Konig Standard Snow Tire Chains - Diamond Pattern - D Link - XB16 - Size 245, part # TH01571245, will fit your vehicle. Since these tire chains are not Class S compatible, you will need to mindful of the wheel well tolerances of your vehicle. This is also why they are better for offroad use, they are made from steel and they have larger D-links.
I have included a video review of these snow tire chains below. view full answer...
The best way to charge your auxiliary LiFePO4 Deep Cycle Battery from the main battery of your 2019 Ram ProMaster is with the Redarc In-Vehicle BCDC Battery Charger # 331-BCDC1240D.
This was designed for larger batteries and it has a built-in smart charging system that reads what kind of battery is being charged and then it adjusts the amount of power output so that the battery isn't damaged and that it gets the most efficient charge possible. Redarc recommends using the 60-Amp MIDI Fuse... view full answer...
We have Aries running boards that fit your 2018 Ram ProMaster but they are the part # AA2055539 and not the ones you mentioned as those fit Wranglers. We do not have any motorized boards for your vehicle. view full answer...
Go To Results